Manual · 25 kN
+ image
Toggle presses cut plastic and elastomer specimens to the geometry required by the relevant standard. Used together with specimen punch dies, available in two models: manual and pneumatic.
- Two models: 25 kN manual (hand-lever) and 60 kN pneumatic
- Clean single-stroke cutting with specimen punch dies
- Ø 20 mm clamping spigot — quick die change
- Compact desktop design, low maintenance
- <75 dB quiet operation and two-hand control on the pneumatic model
Models
| Parameter | Manual Toggle Press 25 kN | Pneumatic Toggle Press 60 kN |
|---|---|---|
| Drive | Hand (lever) | Pneumatic (double-acting cylinder) |
| Press Force | 25 kN | 60 kN |
| Throat Depth | — | 150 mm |
| Working Height | 57–238 mm | 87–310 mm |
| Stroke Distance | 40 mm | 40 mm |
| Table Size (W×D) | 185×145 mm | 305×210 mm |
| Footprint (W×D) | 185×300 mm | 305×440 mm |
| Weight | ~41 kg | ~140 kg |
| Power | — | 230 V · 50/60 Hz · 50 W |
| Air Connection | — | R 3/8″ |
Both models have a Ø 20 mm clamping spigot.
Compatible Specimen Punch Dies
The following standard specimen punch dies are used with these presses. The die is selected according to the test standard; custom dies to a specific geometry are also produced.
| Die | Standard | Specimen Type | Application |
|---|---|---|---|
| Tip 1A / 1B | ISO 527-2 | Tensile (dumbbell) | Plastics |
| Tip 1 / 2 | ISO 37 | Tensile (dumbbell) | Elastomer / rubber |
| S1 / S2 / S3A | DIN 53504 | Tensile | Vulcanized rubber |
| Type I–V | ASTM D638 | Tensile | Plastics |
| Angle / Crescent | ISO 34-1 | Tear | Elastomer |
| Angle specimen | ASTM D624 | Tear | Elastomer |
| Custom-made | Customer-specific | — | Requested geometry |